Design a 3D-printable part with AI CAD
Create an editable CAD model with Objify and export it as 3MF for preparation in your preferred slicer.
Start with the part's job
A printable model starts with a clear requirement. Is it a desk organiser, a spacer or a bracket? Measure the objects it must fit and record dimensions in a consistent unit. Identify which surfaces matter for fit and which can change.
In Objify, describe the part and its dimensions to generate an editable CAD model. For an enclosure, include the outside size, wall thickness, openings and whether the lid should be a separate component. Review the geometry before adding cosmetic details.
Allow for walls, fit and manufacturing variation
Wall thickness depends on the material, printer, nozzle or process and the load on the part. There is no single thickness or clearance that works for every print. Use your printer and material guidance, then test a small sample when fit matters.
A shaft and hole with the same nominal diameter may not fit after printing. Add intentional clearance and use a fit test before printing a large assembly. Keep important dimensions parametric so that you can revise the design after measuring the prototype.
Check orientation and support needs
Export your model from Objify as 3MF, then use your preferred slicer to check orientation and support needs. Orientation affects supports, surface finish and the direction of layers relative to expected loads.
A flat base can make bed placement easier, while a deep unsupported recess may need a redesign or support material. Consider splitting a complex model into components if that improves printing and assembly. Check the resulting joints and clearances.
Export and preview the toolpath
Export STL or 3MF for the slicer. Check the imported dimensions: STL does not carry a standard unit declaration, so an assumption mismatch can produce the wrong scale. 3MF can carry units, but you should still verify the imported size and your slicer's interpretation.
Inspect layer previews for missing walls, unsupported islands and unexpected gaps. Select settings for the actual material and machine. An AI-generated model is a starting point; printing successfully does not prove that a part is safe for a demanding mechanical application.
Explore Objify CAD features, follow the modelling workflow or download Objify.